Click here for our Mobile Device
Friendly site
Our Exam Preparation class has been
taken by many of you to help you Pass
your Electrical Licensing Exam.
NEW: We have now added optional
days to the Exam Prep Course to Improve
your Exam Prep Experience:
Journeyman Comprehensive Exam Prep Course
(4-days):
-This includes the traditional 2-day Exam Prep
plus 2-days of Understanding the National
Electrical Code.
Master/Contractor Comprehensive Exam Prep
Course (5-days):
-This includes the traditional 2-day Exam Prep
plus 2-days of Understanding the National
Electrical Code, plus a fifth day of Commercial Calculations.
-Or take the 2-day course that many have been successful with for either Journeyman or Master/Contracter Code Calculations.
Use our Navigation on the left
to see more classes!
It does not matter what level of
test you are preparing for,
this class will help you prepare.
The electrical code requirements covered by the two-day calculations class will be necessary for any level of license:
-Journeyman Electrician
-Master Electrician
-Electrical Contractors
-Electrical Inspectors
Receive Schedule and Updates by
Email:
We would like to offer to send you our class schedule by email on an occasional basis. Please go to our Schedule page to sign up to receive our convenient email class schedule information.
Thanks!
Our Exam Preparation Classes
help you pass that Electrical Licensing Exam-- and National Electrical Code classes.
Our classes are approved for Continuing Education for electrician license renewal
in South Dakota, Wyoming, and numerous other states that recognize these
pre-approvals.
Steve,
"I feel great about passing my Journeyman exam on the first try!"
"I took your Electrical Exam Preparation class in Rapid City, and purchased Mike Holt's Journeyman Simulated Exam, and Understanding the NEC Vol. 1 & 2. I then studied the books as you advised."
The material you covered in only 2 days-
Motor calculations,
raceway & box calculations,
voltage drop calculations,
dwelling unit calculations,
conductor sizing & protection calculations
-probably covered approximately 50% or more of the questions on the exam I took.
"I highly recommend to everyone wanting to pass the exam, to take your class!"
"After completing and mastering Mike Holt's Journeyman Simulated Exam, (which covered theory, code, and calculations) at home; the exam questions seemed to be not so intimidating."
"I took the ICC Laser Grade Computer exam in Casper, Wyoming."
"Thanks again Steve!"
Jay Robberson Glenrock, Wyoming
WY Master's Exam Success!
"I have passed my masters exam!"
"I feel great about passing it
on the first try!'
"I took your code update class in
Rock Springs in December. While I was
there I purchased Mike Holt's Electrical
Exam Preparation book. I studied that
book according to the instructions for
two month's."
"I then took your class on Electrical Exam Preparation in February. I studied for
another month and took the the test in
Casper, Wyoming. Your classes were
a great help and the study book was
also very helpful. I would highly recommend
that others wanting to pass their exam's
take your class. Thank you very much for your assistance in my success."
-Richard Glasgow
"Congratulations Richard!"
"Your work, study, and determination
have paid off!"
It is always so good to hear from successful graduates when they pass the exam! There is no magical formula to passing an exam other than to use the best books to study and attend an exam prep class. The work that Jay put into his study paid off in a big way. Anyone who wishes to pass the FIRST TIME may benefit from Jay's study process above.
Method:
The method of study that Richard describes above is a very good recommendation for anyone preparing for an exam. Start with a good code review, such as our Code Update class or Understanding the NEC Class, spend time studying the Exam Prep book, then follow up with the Exam Prep calculations course.
Another Success Story
"I wanted to take a few minutes to thank you for having the calculation seminar in Cheyenne Wyoming. It was a great asset for me I tested for my Wyoming Masters. Although I do not know what my official test score is yet I do know by phone that with the State that I passed."
"They will not give the score by phone but the person I talked with said that I did exceptionally well on the test. I had tested in June and missed by 2 points."
"I feel that thanks to dedicated people like yourself and Mike Holt I now have a new future. I have the paper work coming for my Wyoming Contractors license. I should be in Business by the end of the month. Once again thanks for my newly gained independence."
Dave Knezovich
Rock Spring, WY
SD Contractor's Exam.
"I just wanted to tell you that
I passed my SD Contractor's test."
"I took your class in Cheyenne in
August and took my test two weeks later
and without a doubt the course and resources helped me pass. I would
highly recommend your course to anyone who wants to improve their career."
"Thank you Steve!"
Rob Thompson Mitchell, SD
"Congratulations Rob! It is always great to hear from successful graduates."
Electrical Formulas with
Sample Calculations 2008
"....... your class was excellent. A must for all people preparing for the exam."
- John Stanley, Douglas WY
(John took our exam prep class and passed the Wyoming Journeyman exam 2 weeks later).
"Thanks to you and your course I passed the Journeyman's exam one week later with an 82%, which in turn got me a bonus at work. Thank you again, I will recommend your course to anyone who will be taking the exam,"
Ted, Rapid City, SD.
"This class shed light onto the dark areas of the code. Time spent here was very worthwhile and I know it will help a lot when taking my Journeyman test."
- Larry M., Custer SD
Electrician's Exam Preparation Course:
This course will help you prepare for a journeyman or master electrical licensing exam. It is also approved for continuing education credit for electrical license renewal. We are using the Electrician's Exam Preparation text book by Mike Holt as the guide and format for this class.
About the Class format:
Steve Arne is an experienced teacher with a technical education degree and state technical education certification, who knows how to help you learn and develop your skills.
Our goal is not to entertain you with our lectures and speeches, but to involve you, motivate you, and teach you to be self sufficient in doing electrical code calculations.
You will spend more time in Steve's classes doing actual electrical code worksheets, after appropriate demonstrations and instructions. The best way to learn is through demonstrations, involvement, and practice.
The typical code calculation problem will be presented in this manner:
- Steve will first provide relevant instruction, explaining code requirements and calculation methods. - Steve will work an example to demonstrate the proper application of the instruction just provided. -The class participants will work problems to build understanding and reinforce instruction. -Participants will come away from the class with the ability to work code problems on their own.